Thank you for choosing to partner with National Stock Number Shop for the Resistor Variable Wire Wound Non NSN parts you require. On this page, you can submit a quote request for Sensor Systems Inc part number 2900WS1084-203, a component that can also be found by inputting NSN 5905004784205 in our search engine. Apart from this item, we also have an array of other in-demand part numbers, all of which can be traced back to a conglomerate of well-known manufacturers that we trust. Explore our expansive part catalogs by scrolling over to our menu and locate products according to manufacturer, NIIN, NSN, and more.
National Stock Number Shop works with numerous government and defense agencies, so we use CAGE Codes like 04454 to uniquely identify items in a standardized manner. Additionally, we utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find Sensor Systems Inc parts under the FSC 5905 Resistors with ease. With this in mind, we encourage you to complete the RFQ form below for NSN 5905004784205 or any others, and see how we can provide you with a customized sourcing solution. For one-on-one assistance, contact us via phone or email at any time; we are available around the clock for customer inquiries!
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-478-4205 Item Description: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 004784205 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2900WS1084-203 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ABMK | OVERALL WIDTH | 0.220 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| ADAT | BODY WIDTH | 0.220 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| AAPN | SECTION QUANTITY | 1 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.030 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABHP | OVERALL LENGTH | 0.686 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE AND TERMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 15786-83289 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| ABTB | MOUNTING HOLE DIAMETER | 0.078 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.083 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote