Thank you for choosing to partner with National Stock Number Shop for the Bearing Plain Rod End NSN parts you require. On this page, you can submit a quote request for Navair And Navsea Managed part number 63A68A2113, a component that can also be found by inputting NSN 3120013267647 in our search engine. Apart from this item, we also have an array of other in-demand part numbers, all of which can be traced back to a conglomerate of well-known manufacturers that we trust. Explore our expansive part catalogs by scrolling over to our menu and locate products according to manufacturer, NIIN, NSN, and more.
National Stock Number Shop works with numerous government and defense agencies, so we use CAGE Codes like 10001 to uniquely identify items in a standardized manner. Additionally, we utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find Navair And Navsea Managed parts under the FSC 3120 Bearings Plain Unmounted with ease. With this in mind, we encourage you to complete the RFQ form below for NSN 3120013267647 or any others, and see how we can provide you with a customized sourcing solution. For one-on-one assistance, contact us via phone or email at any time; we are available around the clock for customer inquiries!
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-326-7647 Item PartTypeName: BEARING,PLAIN,ROD END | 3120 | 013267647 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 63A68A2113 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AGGH | OUTER MEMBER WIDTH | 0.2500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP E52100 INNER MEMBER OR BRONZE INNER MEMBER OR NICKEL INNER MEMBER AND STEEL INNER MEMBER |
| SFTT | SURFACE TREATMENT | CHROMIUM RACE INSERT OR OXIDE RACE INSERT |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| AGGG | BORE CENTER TO SHANK END DISTANCE | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM RACE INSERT |
| MATT | MATERIAL | STEEL COMP E52100 RACE INSERT OR BRONZE RACE INSERT OR NICKEL RACE INSERT AND STEEL RACE INSERT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE INNER MEMBER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | 0.7600 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.190 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM INNER MEMBER |
| MATT | MATERIAL | STEEL COMP 1018 ROD END BODY OR STEEL COMP 1213 ROD END BODY OR STEEL COMP 1144 ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY AND CHROMATE ROD END BODY |
| SFTT | SURFACE TREATMENT | CHROMIUM INNER MEMBER OR OXIDE INNER MEMBER |
| ABHP | OVERALL LENGTH | 1.6300 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | BALL AND RACE SHALL NOT BE MADE OF THE SAME BASE MATERIAL; ONLY STEEL BALL AND RACE SHALL BE HEAT TREATED AND SURFACE FINISHED; RADIAL PLAY SHALL NOT EXCEED 0.003 IN. WHEN MEASURED 85.0 DEG MIN TO 95.0 DEG MAX TO THE AXIS OF THE BALL STUD U |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE RACE INSERT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote