Thank you for choosing to partner with National Stock Number Shop for the Cylinder Assembly Hydraulic Brak NSN parts you require. On this page, you can submit a quote request for Eaton Corporation part number 18050-10, a component that can also be found by inputting NSN 1630000562329 in our search engine. Apart from this item, we also have an array of other in-demand part numbers, all of which can be traced back to a conglomerate of well-known manufacturers that we trust. Explore our expansive part catalogs by scrolling over to our menu and locate products according to manufacturer, NIIN, NSN, and more.
National Stock Number Shop works with numerous government and defense agencies, so we use CAGE Codes like 99643 to uniquely identify items in a standardized manner. Additionally, we utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find Eaton Corporation parts under the FSC 1630 Aircraft Wheel and Brake systems with ease. With this in mind, we encourage you to complete the RFQ form below for NSN 1630000562329 or any others, and see how we can provide you with a customized sourcing solution. For one-on-one assistance, contact us via phone or email at any time; we are available around the clock for customer inquiries!
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1630-00-056-2329 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 1630 | 000562329 | 0 | P | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18050-10 | 2 | 3 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CLMQ | MOUNTING FACILITY DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| CLMS | PORT LOCATION AND QUANTITY | 1 PISTON ROD END AND 2 CENTER SECTION |
| CLMT | PORT STYLE | GASKET SEAL SINGLE PORT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF SINGLE PORT |
| CLMX | PORT THREAD DIAMETER | 0.438 INCHES NOMINAL SINGLE PORT |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 SINGLE PORT |
| CLNB | PORT THREAD CLASS | 3B SINGLE PORT |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
| MATT | MATERIAL | ALUMINUM ALLOY 356.0 BODY |
| TEST | TEST DATA DOCUMENT | 77272-114HS105 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114HS105 FSCM 77272 |
| AAHB | FIRST END OUTSIDE DIAMETER | 0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM ALL WORKING ENDS |
| ABDR | MOUNTING PROVISION | PIN |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT |
| ABKP | MOUNTING FACILITY LENGTH | 1.440 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 1.840 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.940 INCHES NOMINAL |
| AFLW | ACTUATION METHOD | DIRECT |
| AJFY | SEAT ANGLE IN DEG | 45.0 SINGLE PORT |
| AMDX | FIRST END HOLE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM ALL WORKING ENDS |
| AMPC | FIRST END THICKNESS AT MOUNTING HOLES | 0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM ALL WORKING ENDS |
| AMQZ | COMPRESSED LENGTH | 11.500 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 13.000 INCHES NOMINAL |
| BMWH | RESERVOIR TYPE | REMOTE |
| BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.188 INCHES MINIMUM AND 1.520 INCHES MAXIMUM |
| CKSF | FIRST PISTON ROD END STYLE | BEARING TYPE ALL WORKING ENDS |
| CLML | MOUNTING TYPE AND LOCATION | TONGUE CYLINDER HEAD END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote