Thank you for choosing to partner with National Stock Number Shop for the Resistor Variable Wire Wound Pre NSN parts you require. On this page, you can submit a quote request for Bourns Instruments Inc part number 2001092302, a component that can also be found by inputting NSN 5905000899527 in our search engine. Apart from this item, we also have an array of other in-demand part numbers, all of which can be traced back to a conglomerate of well-known manufacturers that we trust. Explore our expansive part catalogs by scrolling over to our menu and locate products according to manufacturer, NIIN, NSN, and more.
National Stock Number Shop works with numerous government and defense agencies, so we use CAGE Codes like 80294 to uniquely identify items in a standardized manner. Additionally, we utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find Bourns Instruments Inc parts under the FSC 5905 Resistors with ease. With this in mind, we encourage you to complete the RFQ form below for NSN 5905000899527 or any others, and see how we can provide you with a customized sourcing solution. For one-on-one assistance, contact us via phone or email at any time; we are available around the clock for customer inquiries!
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-089-9527 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 000899527 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2001092302 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR W/TAB/FLANGE MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | 0.900 INCHES MINIMUM |
| ABHP | OVERALL LENGTH | 11.580 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.000 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.201 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.188 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 4.830 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 6.110 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.950 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.930 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.201 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,THREADED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.440 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 5.550 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 12.5 KILOHMS ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/0.50 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 ALL SECTIONS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6250.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 80378-215-48103-5 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote