Thank you for choosing to partner with National Stock Number Shop for the Bolt Close Tolerance NSN parts you require. On this page, you can submit a quote request for Avibank Mfg Inc part number SS5116-10-52, a component that can also be found by inputting NSN 5306012740036 in our search engine. Apart from this item, we also have an array of other in-demand part numbers, all of which can be traced back to a conglomerate of well-known manufacturers that we trust. Explore our expansive part catalogs by scrolling over to our menu and locate products according to manufacturer, NIIN, NSN, and more.
National Stock Number Shop works with numerous government and defense agencies, so we use CAGE Codes like 84256 to uniquely identify items in a standardized manner. Additionally, we utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find Avibank Mfg Inc parts under the FSC 5306 Bolts with ease. With this in mind, we encourage you to complete the RFQ form below for NSN 5306012740036 or any others, and see how we can provide you with a customized sourcing solution. For one-on-one assistance, contact us via phone or email at any time; we are available around the clock for customer inquiries!
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-274-0036 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 012740036 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SS5116-10-52 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| ANEE | GRIP LENGTH | 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | 54800 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.968 INCHES MINIMUM FIRST HOLE AND 4.018 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | ASUPPLY WITH DOG TYPE POINT 0.499 IN. MIN AND 0.552 IN. MAX. DIAMETER; 0.537 IN. NOMIANL LENGTH WITH GROOVE PIN MADE OF 300 DERISED CRES PER FED-STD-66; APPLY DRY FILM LUBRICANT TO PAWL/RETAINER |
| MATT | MATERIAL | STEEL COMP 302B SPRING OR STEEL COMP 304 SPRING OR STEEL COMP 631 SPRING |
| MATT | MATERIAL | STEEL COMP 303 POINT OR STEEL COMP 303MA POINT OR STEEL COMP 303PB POINT OR STEEL COMP 303 PLUS X POINT OR STEEL COMP 303SE POINT |
| MATT | MATERIAL | STEEL COMP XM-13 FASTENER |
| MATT | MATERIAL | STEEL COMP XM-13 STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A580 ASSN STD 1ST MATERIAL RESPONSE SPRING OR ASTM A580 ASSN STD 2ND MATERIAL RESPONSE SPRING OR AMS5678 ASSN STD 3RD MATERIAL RESPONSE SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| SFTT | SURFACE TREATMENT | PASSIVATE SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE STAND-OFF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.476 INCHES MINIMUM AND 1.526 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 4.736 INCHES MINIMUM AND 4.766 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| AASU | HEAD HEIGHT | 0.608 INCHES MINIMUM AND 0.628 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.672 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote